Allen-Bradley ControlLogix 8 Point Analog Output 1756-OF8I With Good Price In Stock

The ControlLogix system provides discrete, drives, motion, process, and safety control together with communication and  state-of-the-art I/O in a small, cost-competitive package. The system is modular, so you can design, build, and modify it  efficiently with significant savings in training and engineering.1756-OF8I

1756 Removable Terminal Blocks Removable terminal blocks (RTBs) provide a flexible interconnection between your plant wiring and  1756 I/O modules. The RTB plugs into the front of the I/O module. The type of module determines the  RTB you need. You can choose screw-clamp or spring-clamp RTBs. RTBs are not shipped with I/O modules. You must order them separately. The standard housing on the  front of the wiring arm is not necessarily deep enough for 2.5 mm2  (14 AWG) wiring. If you plan to use  2.5 mm2  (14 AWG) wiring, also order the extended housing. For more information on Extended-Depth  Housing, see Rockwell Automation Knowledgebase article #41488, Use of the 1756-TBE Extended  Terminal Housing 1756-OF8I

The 1756-OF8I by Allen-Bradley is a high-performance analog output module that features 8 current outputs. Being part of the CntrolLogix series, the module is configurable with any slot in the 1756 chassis. It possesses selectable output ratings of -10 to 10 Volts, 0 to 10 Volts, 0 to 5 Volts, and 0 to 20 milliamps, plus an 18-bit resolution. Its backplane current is 200 milliamps at 5.1 Volts DC and 275 milliamps at 24 Volts DC. The module’s backplane power output is 6.3 Watts in the voltage mode and 6.3 to 10.2 Watts in the current mode. This analog output module also has a power and thermal dissipation level that is dependent on the load at the current mode. However, this value remains constant at 18.4 BTU per hour. The 1756-OF8I provides open-circuit detection for all current outputs and short-circuit protection for voltage outputs.

It provides an over-voltage protection level of ±30 Volt DC in both the current and voltage modes. The module also has a drive capability of 0 to 1000 I (current) and a >1000 I (current) and an overall current output impedance of 46 I. Its calibration accuracy is about 0.05% while its module settling time is 1 milliseconds. This means that the 1756-OF8I can only accommodate a 0.1% module error. The module adopts the IEEE 32-bit format (floating point) and it uses the R-Ladder DAC conversion technique. Its isolation voltage is 25 Volts with basic as well as reinforced insulation designs tested at 1500 Volts AC and 2300 Volts AC for 60 seconds between the outputs and the backplane. This Allen-Bradley analog output is IEC 60068-2-27-tested to tolerate a 30G operational shock and it has an operational temperature range of between 0 and 60 degrees Celsius at 5 to 95% non-condensing humidity. Furthermore, the 1756-OF8I delivers high output and optimal reliability.

if you are intersted in more Allen-Bradley product, Please feel free to contct below contact me :windy@hkxytech.com 

Windy Wang 
HONGKONG XIEYUAN TECH CO., LIMITED  
Add: 7-A16,Caishen Commercial Plaza,Hankou Railway Station,Wuhan,China
Tel: +86-27-8588 3233 | Fax:+86-27-8530 9780 | Mobile/Whatsapp :+86 15972199006 | Skype: windy@hkxytech.com
Mail: windy@hkxytech.com 
Website:  http://www.hkxytech.com/   | GMT/UTC +8