MTL7787+/- MTL7700 Series DIN-rail mounting safety barriers With Good Price In Stock

• Removable terminals 

• Bussed power feed to other modules 

• Relay and solid state switch modules 

• Dual channel variants – 6.3mm per channel 

• Proximity detector inputs 

• Electronic fusing 

• Direct replacement for MTL700 Series barriers 

• Compatible terminal numbering and safety descriptions  

MTL7000 Series award-winning,intrinsic safety shunt-diode safety barriers are innovative devices designed to provide exceptionally high packing densities, straightforward‘single-operation’ installation and simplified connection, commissioning and maintenance facilities. Many of the MTL7000 Series features duplicate the functions of conventional field terminals and the barriers can, therefore, “double up”as terminals for many applications, saving even more space. 

Since its introduction in 1984 the MTL700 Series barrier has  established itself as the worldwide standard for safety barriers.  Known for its quality and reliability, the MTL700 Series is widely  used in applications all over the world. The MTL7700 Series follows closely in the footsteps of the MTL700,  but as a DIN rail mounting barrier, providing quick and easy  installation without the need for special hardware. Removable terminals are used for ease of installation, maintenance  and for providing a loop disconnect by simply unplugging the  terminals from the side of the module. Wire entry is also angled to  assist wiring within limited space enclosures. MTL7700 barriers clamp simply and securely onto standard  T-section DIN rail, simultaneously making a reliable IS earth  connection. For applications where field power is required for switch inputs or  2-wire transmitters, the MTL7700 Series provides a bussed power  feed facility. When used in conjunction with the MTL7798 power  feed module the user has a fully protected, electronically fused  supply to many barriers with no additional wiring required. 

The recommended barrier for use with 'conventional' and 'smart' 4/20mA transmitters (fed by a 26V regulated supply) is the MTL7787+. This provides up to 12.9V (14.6V for MTL7787P+) at Vwkg and 20mA

for a transmitter and its lines as well as 5V for the typical 250Ω load. This application and this barrier is suitable for use with the optional power bus facility

Controller outputs (I/P converters)

The single-channel MTL7728+ with a voltage drop of 6.66V at 20mA is the recommended choice for most controller outputs. Higher-power versions are available: the MTL7728P+ (5.1V drop) is suitable for IIC applications; the MTL7729P+ (3.68V drop) for IIB applications.

For controllers with an output circuit separated from the 0V rail by the control transistor, the 2-channel MTL7787+ is the preferred choice as the return channel can handle up to 26.6V allowing the control signal to

be turned off completely. The voltage drop is 8.1V at 20mA. A higherpower version of the latter, the MTL7787P+, is also available. The return channel of these barriers handle up to 26.4V and the maximum voltage drop is only 6.38V.

The MTL7787+ and MTL7787P+ are also suitable for controllers containing a resistor which enables the return current to be monitored for high-integrity operation.

if you are intersted in more  product, Please feel free to contct below contact me :windy@hkxytech.com 

Windy Wang 
HONGKONG XIEYUAN TECH CO., LIMITED  
Add: 7-A16,Caishen Commercial Plaza,Hankou Railway Station,Wuhan,China
Tel: +86-27-8588 3233 | Fax:+86-27-8530 9780 | Mobile/Whatsapp :+86 15972199006 | Skype: windy@hkxytech.com
Mail: windy@hkxytech.com 
Website:  http://www.hkxytech.com/   | GMT/UTC +8