Honeywell C7061F2001 Flame Detector With Good Price In Stock

C7061F2001 Honeywell Ultraviolet Flame Detector, Dynamic Self Checking Purple Peeper, 120vac, 1 Inch Mounting, 96 Inch Color Coded Lead Wires, Explosion Proof Rated, -40/175 Degree Ambient Temperature Rating, Used with R7861 Dynamic Self Check Amplifiers, For Use on Combustion Gas, Oil and Other Fuels

The C7061A,F are dynamic self-checking flame detectors for sensing the ultraviolet radiation generated by the combustion of gas, oil, or other fuels.

• Oscillating shutter interrupts ultraviolet radiation reaching the UV sensor 12 times per minute to provide the UV sensor tube checking function. Amplifier circuitry components are checked from the microprocessor in the 7800 Series Control.

• Detectors can be mounted horizontally, vertically or at any other angle. The self-checking C7061 models require faceplate alignment and have integral locating reference points to assure proper shutter mechanism operation.

• Ultraviolet radiation sensing tube and quartz viewing window are field replaceable.

• Threaded conduit fitting and color-coded leadwires allow rapid electrical installation.

• Models available using Brad Harrison® 41310 connector.

• Two flame detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame sighting applications.

• -40°F (-40°C) rated ultraviolet sensing tube.

• Incorporates UV sensor tube checking feature; used with R7861 Dynamic Self-check Amplifiers.

• Housing meets NEMA 4 enclosure standards (C7061A).

• Protective heat block built into mounting flange.

Overview of C7061F2001 

Dynamic self-checking flame detector used with R7861 Dynamic Self-check Amplifiers for sensing the ultraviolet radiation generated by the combustion of gas, oil, or other fuels.

Features of C7061F2001 

• Oscillating shutter interrupts ultraviolet radiation reaching the UV sensor to provide the UV sensor tube checking function.

• Can be mounted horizontally, vertically or at any angle in between.

• The detector requires faceplate alignment and has integral locating reference points to assure proper operation of the shutter mechanism.

• Field replaceable ultraviolet sensing tube and quartz viewing window.

• Models with threaded conduit fitting and color-coded leadwires allow rapid electrical installation.

• C7061A1038 or A1046 5 pin Brad Harrison type (formally 41307N) mating connector not supplied nor available through Honeywell.

• Two detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame sighting applications.

• Protective heat block built into mounting flange.

• -40 F (-40 C) rated ultraviolet sensing tube is supplied.

• C7061E meets NEMA 4 standards with viewing window rated to 20 psi.

• C7061F has an explosion-proof housing for use in hazardous atmospheres with a viewing window rated to 100 psi.

Product Specifications of C7061F2001 

• Application

• Gas fired burners; Oil fired burners

• Used With

• Flame Amplifiers: R7861

• Comments

• Dynamic self-checking flame detector

• Mounting

• 1 in. NPT

• Electrical Ratings

• 120 Vac

• Frequency

• 50 Hz; 60 Hz

• Approvals, Underwriters Laboratories Inc.

• Component Recognized: For use in hazardous locations; Class 1 Groups C and D; class 2, Groups E, f and G; File no.E34649

• Approvals, Canadian Standards Association

• Certified: Master Report LR95329-1

• Electrical Connections

• Color-coded lead wires

• Approvals, Swiss RE

• Acceptable

• Approvals, Factory Mutual

• Approved: Report No. 14740.01

• Ambient Temperature Range (F)

• -40 F to +175 F

• Ambient Temperature Range (C)

• -40 C to +79 C

• NEMA Rating

• Explosion Proof

• Lead Length (in.)

• 96 in.

• Lead Length (mm)

• 2438 mm

Honeywell C7061F1003

Honeywell C7061A1012

Honeywell C7061F2001

Honeywell C7061A1020

Honeywell MGB-100U Burner Flame Switch Sensor MGB100U

Honeywell High Level Analog Input FTA MC-TAIH13

Honeywell BC1000A0110U Burner Controller Flame Switch Sensor

Honeywell UV Power Sensing Tube 129464M Sensor

Honeywell CSNP661 Closed Loop Linear Current Sensor

Honeywell C7027A1049 Ultraviolet Flame Sensor Mini-Peeper

Honeywell C7027A1023 Ultraviolet Flame Detector Sensor

Honeywell LS4A1A Limit Switch Roller Actuator Sensor

Honeywell GXE51B Limit Switch Actuator Plunger Sensor

Honeywell C7061A1012 Flame Sensor Amplifiers

Honeywell C7035A1031 Flame Sensor Amplifiers

Honeywell C7035A1023 Flame Sensor Amplifiers

Honeywell C7027A1064 Flame Sensor Amplifiers

Honeywell C7012E1278 Flame Amplifiers Sensor

Honeywell C7012E1187 Flame Amplifiers Sensor

Honeywell C7012E1146 Flame Amplifiers Sensor

Honeywell C7012E1120 Flame Amplifiers Sensor

Honeywell C7012E1112 Flame Amplifiers Sensor

Honeywell C7012E1104 Flame Amplifiers Sensor

Honeywell C7012A1145 Flame Amplifiers Detector Sensor

Honeywell C7008A1174 Flame Sensor Gas Fired Pilot

Honeywell R7849A1023 Flame Amplifier Minipeeper Sensor

Honeywell R7849A1015 Flame Minipeeper Amplifier Sensor

Honeywell C7035A1064 Digital Ultraviolet Flame Detection Sensor

if you are intersted in more Allen-Bradley product, Please feel free to contct below contact me :windy@hkxytech.com 

Windy Wang 
HONGKONG XIEYUAN TECH CO., LIMITED  
Add: 7-A16,Caishen Commercial Plaza,Hankou Railway Station,Wuhan,China
Tel: +86-27-8588 3233 | Fax:+86-27-8530 9780 | Mobile/Whatsapp :+86 15972199006 | Skype: windy@hkxytech.com
Mail: windy@hkxytech.com 
Website:  http://www.hkxytech.com/   | GMT/UTC +8