Honeywell SPXCDDMR Replacement display module for RFD (4~20mA), without MODBUS With Good Discount In Stock
Description of Honeywell SPXCDDMR
The Sensepoint XCD RFD transmitter allows the user to either directly or remotely mount a flammable gas sensor from the Sensepoint XCD. See sensor information in section 4.2. The remote sensor can be located up to 30 meters (100 feet) from the transmitter. The transmitter features a display and three programmable relays for controlling external equipment e.g. alarms, sirens, valves or switches. The transmitter provides an industry standard 3-wire, 4-20mA source or sink output for connection to a dedicated gas detection control system or PLC. The construction of Sensepoint XCD RFD allows it to be used in hazardous area locations; it may also be used in other areas not classified as hazardous. Sensepoint XCD RFD is suitable for use in Class I Division 1 areas. Calibration and maintenance is carried out using a Magnetic Wand, this allows a single user to undertake routine maintenance without needing to access internal components. Sensepoint XCD RFD comprises of the main parts as shown below.
The transmitter enclosure has three threaded entries. The two cable entries either side of the upper part of the transmitter housing are for connecting the power source, signal output and relay contacts to associated signalling equipment. The bottom entry allows local (direct) mounting of the appropriate sensor. These three entries are ¾” NPT for the Americas. A local LCD provides gas type, concentration, alarm and operating status. The display provides numerical, bar graph and icon information. Diagnostic information may also be displayed when the transmitter is interrogated using a magnet. The transmitter cover has a glass window which allows use of the Magnetic Wand to activate the three user interface magnetic switches that are located on the front of the display module. The magnet also enables a non intrusive, one-man calibration and configuration facility for the Sensepoint XCD RFD.
4.2 Flammable Gas sensors of Honeywell SPXCDDMR
The Sensepoint XCD/RFD Transmitter is designed to work with the following flammable gas sensor types described in below sections 4.2.1, 4.2.2 and 4.2.3. Sensepoint XCD sensors use electro-catalytic technologies. The Sensepoint XCD RFD is cCSAus approved for use in North America. Please refer to chapter 15 ‘Ordering information'for more detail information.
Part number Description
Sensepoint XCD RFD transmitter (LM25)
SPXCDULNRFD cCSAus approved SP XCD RFD Transmitter with LM25, 3/4“NPT Entry, without MODBUS
SPXCDULNRFDM cCSAus approved SP XCD RFD Transmitter with LM25, 3/4“NPT Entry, with MODBUS
Sensepoint XCD RFD transmitter (316SS)
SPXCDUSNRFD cCSAus approved SP XCD RFD Transmitter with 316SS, 3/4“NPT Entry, without MODBUS
SPXCDUSNRFDM cCSAus approved SP XCD RFD Transmitter with 316SS, 3/4“NPT Entry, with MODBUS
Replacement Sensor
00705-A-1733 Standard (UL/CSA) LEL Version, -55’C to +80’C, Aluminium, 3/4NPT Version, UL/CSA Certification
00705-A-1735 High Temperature (UL) LEL Version, -40’C to +150’C, Aluminium, 3/4NPT Version, UL Certification
Sensepoint XCD Accessories
SPXCDSDP Sunshade / Deluge Protection
Sensepoint / 705 Accessories
2430-0021 UL/CSA Aluminum 3 wire Junction Box Assembly
02000-A-1642 Collecting Cone
00780-A-0035 Calibration Gas Flow Housing for 705 Sensors
00780-A-0076 Weather Protection Stainless Steel for high temps.
02000-A-1635 Weather Protection Housing for 705 Sensors
1283-1047 Duct Mount Adaptor Assembly (Requires PN# 1283-1084)
Sensepoint XCD Spares
SPXCDDMR Replacement display module for RFD (4~20mA), without MODBUS
SPXCDTMR Replacement terminal module for RFD (4~20mA)
SPXCDDMRM Replacement display module for RFD (4~20mA), with MODBUS
SPXCDNPTP 3/4“ NPT Plug
SPXCDMAG Magnet
SPXCDAKS Allen key for stopper
SPXCDHWES Hex wrench for earth screw
SPXCDEBS Earth Bracket and Screws
Sensepoint Spares
00780-F-0018 Stainless steel filter, High temperature LEL Version, -40°C to +150°C
00780-C-0038 Filter Housing, High temperature LEL Version, -40°C to +150°C
Kits (All Kits include transmitter, sensor, and junction box)
XCDRFDL cCSAus approved SPXCD RFD Transmitter with LM25, 3/4“NPT Entry,aluminum, 705 sensor, and 3 wire junction box
XCDRFDLH cCSAus approved SPXCD RFD Transmitter with LM25, 3/4“NPT Entry, aluminum,705 High Temp sensor and 3 wire junction box
XCDRFDLM cCSAus approved SPXCD RFD Transmitter with LM25, 3/4“NPT Entry, MODBUS, aluminum,705 sensor, and 3 wire junction box
XCDRFDLMH cCSAus approved SPXCD RFD Transmitter with LM25, 3/4“NPT Entry, MODBUS, aluminum,705 High Temp sensor, and 3 wire junction box
XCDRFDS cCSAus approved SPXCD RFD Transmitter with 3/4“NPT Entry, 316SS,with 705 sensor, and 3 wire junction box
XCDRFDSH cCSAus approved SPXCD RFD Transmitter with 3/4“NPT Entry, 316SS,705 High Temp sensor, and 3 wire junction box
XCDRFDSM cCSAus approved SPXCD RFD Transmitter with 3/4“NPT Entry, MODBUS,316SS, 705 sensor, and 3 wire junction box
XCDRFDSMH cCSAus approved SPXCD RFD Transmitter with 3/4“NPT Entry, MODBUS,316SS, 705 High Temp sensor, and 3 wire junction box
Model numbers:
SPXCDALMFX ATEX/IECEX & AP approved SP XCD Flammable CAT, 0-100%LEL (20,0 to 100.0%LEL) with LM25, M20 Entry
SPXCDALMRX ATEX/IECEX & AP approved SP XCD CH4(Methane) IR, 0-100%LEL (20,0 to 100.0%LEL) with LM25, M20 Entry
SPXCDALMPX ATEX/IECEX & AP approved SP XCD C3H8(Propane) IR, 0-100%LEL (20,0 to 100.0%LEL) with LM25, M20 Entry
SPXCDALMO1 ATEX/IECEX & AP approved SP XCD Oxygen, 25.0%/Vol with LM25, M20 Entry
SPXCDALMHX ATEX/IECEX & AP approved SP XCD Hydrogen Sulphide 0-50ppm (10.0 to 100.0ppm) with LM25, M20 Entry
SPXCDALMCX ATEX/IECEX & AP approved SP XCD Carbon Monoxide 0-300ppm (100 to 1000ppm) with LM25, M20 Entry
SPXCDALMG1 ATEX/IECEX & AP approved SP XCD Hydrogen 0-1000ppm with LM25, M20 Entry
SPXCDALMNX ATEX/IECEX & AP approved SP XCD Nitrogen Dioxide 0-50ppm with LM25, M20 Entry
SPXCDALMB1 ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide) IR 0-2%VOL with LM25, M20 Entry
SPXCDALMB2 ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide) IR 0-5%VOL with LM25, M20 Entry
SPXCDASMFX ATEX/IECEX & AP approved SP XCD Flammable CAT 0-100%LEL (20,0 to 100.0%LEL) with SS316, M20 Entry
SPXCDASMRX ATEX/IECEX & AP approved SP XCD CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL) with SS316, M20 Entry
SPXCDASMPX ATEX/IECEX & AP approved SP XCD C3H8(Propane) IR 0-100%LEL (20,0 to 100.0%LEL) with SS316, M20 Entry
SPXCDASMO1 ATEX/IECEX & AP approved SP XCD Oxygen 25.0%/Vol with SS316, M20 Entry
SPXCDASMHX ATEX/IECEX & AP approved SP XCD Hydrogen Sulphide 0-50ppm (10.0 to 100.0ppm) with SS316, M20 Entry
SPXCDASMCX ATEX/IECEX & AP approved SP XCD Carbon Monoxide 0-300ppm (100 to 1000ppm) with SS316, M20 Entry
SPXCDASMG1 ATEX/IECEX & AP approved SP XCD Hydrogen 0-1000ppm with SS316, M20 Entry
SPXCDASMNX ATEX/IECEX & AP approved SP XCD Nitrogen Dioxide 0-50ppm with SS316, M20 Entry
SPXCDASMB1 ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide) IR 0-2%VOL with SS316, M20 Entry
SPXCDASMB2 ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide) IR 0-5%VOL with SS316, M20 Entry
SPXCDALMFXM ATEX/IECEX & AP approved SP XCD Flammable CAT, 0-100%LEL (20,0 to 100.0%LEL) with LM25, M20 Entry, With Modbus
SPXCDALMRXM ATEX/IECEX & AP approved SP XCD CH4(Methane) IR, 0-100%LEL (20,0 to 100.0%LEL) with LM25, M20 Entry, With Modbus
SPXCDALMPXM ATEX/IECEX & AP approved SP XCD C3H8(Propane) IR, 0-100%LEL (20,0 to 100.0%LEL) with LM25, M20 Entry, With Modbus
SPXCDALMO1M ATEX/IECEX & AP approved SP XCD Oxygen, 25.0%/Vol with LM25, M20 Entry, With Modbus
SPXCDALMHXM "ATEX/IECEX & AP approved SP XCD Hydrogen Sulphide 0-50ppm (10.0 to 100.0ppm) with LM25, M20 Entry, With Modbus"
SPXCDALMCXM "ATEX/IECEX & AP approved SP XCD Carbon Monoxide 0-300ppm (100 to 1000ppm) with LM25, M20 Entry, With Modbus"
SPXCDALMG1M ATEX/IECEX & AP approved SP XCD Hydrogen 0-1000ppm with LM25, M20 Entry, With Modbus
SPXCDALMNXM ATEX/IECEX & AP approved SP XCD Nitrogen Dioxide 0-50ppm with LM25, M20 Entry, With Modbus
SPXCDALMB1M ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide) IR 0-2%VOL with LM25, M20 Entry, With Modbus
SPXCDALMB2M ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide) IR 0-5%VOL with LM25, M20 Entry, With Modbus
SPXCDASMFXM "ATEX/IECEX & AP approved SP XCD Flammable CAT 0-100%LEL (20,0 to 100.0%LEL) with SS316, M20 Entry, With Modbus"
SPXCDASMRXM "ATEX/IECEX & AP approved SP XCD CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL) with SS316, M20 Entry, With Modbus"
SPXCDASMPXM "ATEX/IECEX & AP approved SP XCD C3H8(Propane) IR 0-100%LEL (20,0 to 100.0%LEL) with SS316, M20 Entry, with Modbus"
SPXCDASMO1M ATEX/IECEX & AP approved SP XCD Oxygen 25.0%/Vol with SS316, M20 Entry, With Modbus
SPXCDASMHXM "ATEX/IECEX & AP approved SP XCD Hydrogen Sulphide 0-50ppm (10.0 to 100.0ppm) with SS316, M20 Entry, With Modbus"
SPXCDASMCXM "ATEX/IECEX & AP approved SP XCD Carbon Monoxide 0-300ppm (100 to 1000ppm) with SS316, M20 Entry, With Modbus"
SPXCDASMG1M ATEX/IECEX & AP approved SP XCD Hydrogen 0-1000ppm with SS316, M20 Entry, With Modbus
SPXCDASMNXM ATEX/IECEX & AP approved SP XCD Nitrogen Dioxide 0-50ppm with SS316, M20 Entry, With Modbus
SPXCDASMB1M ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide) IR 0-2%VOL with SS316, M20 Entry, With Modbus
SPXCDASMB2M ATEX/IECEX & AP approved SP XCD CO2(Carbon Dioxide) IR 0-5%VOL with SS316, M20 Entry, With Modbus
SPXCDULNFX "UL approved SP XCD Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with LM25, 3/4""NPT Entry"
SPXCDULNRX "UL approved SP XCD CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with LM25, 3/4""NPT Entry"
SPXCDULNPX "UL approved SP XCD C3H8(Propane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with LM25, 3/4""NPT Entry"
SPXCDULNO1 UL approved SP XCD Oxygen 25.0%/Vol with LM25, 3/4"NPT Entry
SPXCDULNHX UL approved SP XCD Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm, 1ppm) with LM25, 3/4"NPT Entry
SPXCDULNCX "UL approved SP XCD Carbon Monoxide 0-300ppm (100 to 1000ppm, 100ppm) with LM25, 3/4""NPT Entry"
SPXCDULNG1UL approved SP XCD Hydrogen 0-1000ppm with LM25, 3/4"NPT Entry
SPXCDULNNXUL approved SP XCD Nitrogen Dioxide 0-50ppm with LM25, 3/4"NPT Entry
SPXCDULNB1UL approved SP XCD Carbon Dioxide IR 0-2%VOL with LM25, 3/4"NPT Entry
SPXCDULNB2UL approved SP XCD Carbon Dioxide IR 0-5%VOL with LM25, 3/4"NPT Entry
SPXCDUSNFX "UL approved SP XCD Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with SS316, 3/4""NPT Entry"
SPXCDUSNRX "UL approved SP XCD CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with SS316, 3/4""NPT Entry"
SPXCDUSNPX "UL approved SP XCD C3H8(Propane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with SS316, 3/4""NPT Entry"
SPXCDUSNO1 UL approved SP XCD Oxygen 25.0%/Vol with SS316, 3/4"NPT Entry
SPXCDUSNHX"UL approved SP XCD Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm, 1ppm) with SS316, 3/4""NPT Entry"
SPXCDUSNCX"UL approved SP XCD Carbon Monoxide 0-300ppm (100 to 1000ppm, 100ppm) with SS316, 3/4""NPT Entry"
SPXCDUSNG1UL approved SP XCD Hydrogen 0-1000ppm with SS316, 3/4"NPT Entry
SPXCDUSNNXUL approved SP XCD Nitrogen Dioxide 0-50ppm with SS316, 3/4"NPT Entry
SPXCDUSNB1UL approved SP XCD Carbon Dioxide IR 0-2%VOL with SS316, 3/4"NPT Entry
SPXCDUSNB2UL approved SP XCD Carbon Dioxide IR 0-5%VOL with SS316, 3/4"NPT Entry
SPXCDULNFXM"UL approved SP XCD Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with LM25, 3/4""NPT Entry, with Modbus."
SPXCDULNRXM"UL approved SP XCD CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with LM25, 3/4""NPT Entry, with Modbus."
SPXCDULNPXM"UL approved SP XCD C3H8(Propane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with LM25, 3/4""NPT Entry, with Modbus."
SPXCDULNO1MUL approved SP XCD Oxygen 25.0%/Vol with LM25, 3/4"NPT Entry, with Modbus.
SPXCDULNHXMUL approved SP XCD Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm, 1ppm) with LM25, 3/4"NPT Entry, with Modbus.
SPXCDULNCXM"UL approved SP XCD Carbon Monoxide 0-300ppm (100 to 1000ppm, 100ppm) with LM25, 3/4""NPT Entry, with Modbus."
SPXCDULNG1MUL approved SP XCD Hydrogen 0-1000ppm with LM25, 3/4"NPT Entry, with Modbus.
SPXCDULNNXMUL approved SP XCD Nitrogen Dioxide 0-50ppm with LM25, 3/4"NPT Entry, with Modbus.
SPXCDULNB1MUL approved SP XCD Carbon Dioxide IR 0-2%VOL with LM25, 3/4"NPT Entry, with Modbus.
SPXCDULNB2MUL approved SP XCD Carbon Dioxide IR 0-5%VOL with LM25, 3/4"NPT Entry, with Modbus.
SPXCDUSNFXM"UL approved SP XCD Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with SS316, 3/4""NPT Entry, with Modbus."
SPXCDUSNRXM"UL approved SP XCD CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with SS316, 3/4""NPT Entry, with Modbus."
SPXCDUSNPXM"UL approved SP XCD C3H8(Propane) IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) with SS316, 3/4""NPT Entry, with Modbus."
SPXCDUSNO1MUL approved SP XCD Oxygen 25.0%/Vol with SS316, 3/4"NPT Entry, with Modbus.
SPXCDUSNHXM "UL approved SP XCD Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm, 1ppm) with SS316, 3/4""NPT Entry, with Modbus."
SPXCDUSNCXM "UL approved SP XCD Carbon Monoxide 0-300ppm (100 to 1000ppm, 100ppm) withSS316, 3/4""NPT Entry, with Modbus."
SPXCDUSNG1MUL approved SP XCD Hydrogen 0-1000ppm with SS316, 3/4"NPT Entry, with Modbus.
SPXCDUSNNXMUL approved SP XCD Nitrogen Dioxide 0-50ppm with SS316, 3/4"NPT Entry, with Modbus.
SPXCDUSNB1MUL approved SP XCD Carbon Dioxide IR 0-2%VOL with SS316, 3/4"NPT Entry, with Modbus.
SPXCDUSNB2MUL approved SP XCD Carbon Dioxide IR 0-5%VOL with SS316, 3/4"NPT Entry, with Modbus.
SPXCDALMRFD ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 2 x M20 Entries,1 x M25 Entry,painted LM25
SPXCDASMRFD ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 2 x M20 Entries,1 x M25 Entry,painted 316SS
SPXCDULNRFD cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 3 x 3/4'' NPT Entries, painted LM25
SPXCDUSNRFD cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 3 x 3/4'' NPT Entries, painted 316SS
SPXCDALMRFD MATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, paited LM25
SPXCDASMRFD MATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, paited 316SS
SPXCDULNRFD McCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted LM25
SPXCDUSNRFD McCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted 316SS
SPXCDXSRFXSS Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing
SPXCDXSRRXSS Methane IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing
SPXCDXSRPXSS Propane IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing
SPXCDXSRB1SS Carbon Dioxide IR 0-2.00%VOL only with Socket Housing Sensor Cartridge with Socket Housing
SPXCDXSRB2SS Carbon Dioxide IR 0-5.00%VOL only with Socket Housing Sensor Cartridge with Socket Housing
00780-A-0100 Term Hsg-Bartec DE1155 With Continuity Plate 1x25mm- 3x20mm Entries (ATEX certified)
S3KCAL
SPXCDCC
SPXCDDMK
SPXCDMTBR
SPXCDSDP
SPXCDFH
SPXCDXSFXSS
SPXCDXSRXSS
SPXCDXSPXSS
SPXCDXSO1SS
SPXCDXSHXSS
SPXCDXSCXSS
SPXCDXSG1SS
SPXCDXSNXSS
SPXCDXSB1SS
SPXCDXSB2SS
SPXCDWP
SPXCDSRLS
SPXCDAKS
SPXCDHWES
SPXCDEBS
SPXCDMAG
SPXCDRSSH
SPXCDMBUS
SPXCDSERVK
SPXCDTOOLK
SPXCDTMK
SPXCDNPTP
SPXCDM20P
SPXCDDMT
SPXCDDMF
SPXCDDM4
SPXCDDMR
SPXCDDMT12
SPXCDDMF12
SPXCDDMTM12
SPXCDDMFM12
SPXCDTMO
SPXCDTMT
SPXCDTMF
SPXCDTMO12
SPXCDTMT12
SPXCDTMF12
SPXCDTM4
SPXCDTMR
SPXCDDMTM
SPXCDDMFM
SPXCDDM4M
SPXCDDMRM
SPXCDALMTXO
SPXCDALMTXT
SPXCDALMTXF
SPXCDASMTXO
SPXCDASMTXT
SPXCDASMTXF
SPXCDALMTXOM
SPXCDALMTXTM
SPXCDALMTXFM
SPXCDASMTXOM
SPXCDASMTXTM
SPXCDASMTXFM
SPXCDULNTXO
SPXCDULNTXT
SPXCDULNTXF
SPXCDUSNTXO
SPXCDUSNTXT
SPXCDUSNTXF
SPXCDULNTXOM
SPXCDULNTXTM
SPXCDULNTXFM
SPXCDUSNTXOM
SPXCDUSNTXTM
SPXCDUSNTXFM
SPXCDSFGC1
SPXCDSFGC2
SPXCDSFGC3
SPXCDSFGC4
SPXCDSFGC5
SPXCDSFGC6-H
SPXCDSFGC7
SPXCDSFGC8
if you are intersted in more product, Please feel free to contct below contact me :windy@hkxytech.com
Windy Wang
HONGKONG XIEYUAN TECH CO., LIMITED
Add: 7-A16,Caishen Commercial Plaza,Hankou Railway Station,Wuhan,China
Tel: +86-27-8588 3233 | Fax:+86-27-8530 9780 | Mobile/Whatsapp :+86 15972199006 | Skype: windy@hkxytech.com
Mail: windy@hkxytech.com
Website: http://www.hkxytech.com/ | GMT/UTC +8