SPXCDALMTXF | Honeywell | Sensepoint XCD Transmitter (without Sensor)
SPXCDALMTXF | Honeywell Sensepoint XCD RTD Transmitter
Honeywell SPXCDALMTXF ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with LM25, M20 Entry
Spares (ATEX APPROVAL Replacement XCD STD version Transmitter only without MODBUS )
Sensepoint XCD
The Sensepoint XCD (exceed) range of fixed gas detectors is used to monitor areas where flammable, oxygen deficiency and toxic gases may pose a hazard to working environments. This advanced and versatile range of gas detectors monitors and indicates the presence of any one of a selection of toxic and flammable gases. Any user can instantly identify the operating status of XCD via its clear multi-function backlit display. Output signals available are industrial standard 4 to 20mA, three relay contacts and MODBUS digital. A magnetic wand allows non intrusive one person calibration, while a wide choice of accesories means XCD can be used in many applications.
Sensepoint XCD with Flammable and Primary Toxic Sensor Cartridge
A Sensepoint XCD KIT consists of Transmitter, Sensor socket, Sensor cartridge, Standard weather protection, Magnetic wand and Allen key.
Sensepoint XCD-RTD transmitter (use with oxygen and toxic Sensepoint sensors)
Sensepoint XCD-RTD (Remote Toxic Detector) allows for a gas sensor from a wider selection of 2-wire 4 to 20 mA input type Toxic and Oxygen sensors to be fitted directly to the transmitter housing, or wired remotely from another location.
KIT includes Transmitter, Magnetic Wand and Allen Key
Sensepoint XCD-RFD transmitter (use with Standard & Hi-Temp Sensepoint sensors)
Sensepoint XCD-RFD (Remote Flammable Detector) allows for remotely mounted flammable gas detectors
such as Hi-Temperature version of Sensepint Flamable to be located in adverse applications and monitored
from a convenient location.
KIT includes Transmitter, Magnetic Wand and Allen Key
| Sensepoint XCD-RTD transmitter (use with oxygen and toxic Sensepoint sensors) |
| Sensepoint XCD-RTD (Remote Toxic Detector) allows for a gas sensor from a wider selection of 2-wire 4 to 20 mA input type Toxic and Oxygen sensors to be fitted directly to the transmitter housing, or wired remotely from another location. KIT includes Transmitter, Magnetic Wand and Allen Key |
| INSTRUMENT |
| Without Modbus |
| SPXCDALMTX4 ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter, 2 x M20 Entries, 1 x M25 Entry, painted LM25 |
| SPXCDASMTX4 ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter, 2 x M20 Entries, 1 x M25 Entry, painted 316SS |
| SPXCDULNTX4 cCSAus approved SP XCD-RTD 4~20mA Input Transmitter, 3 x 3/4'' NPT Entries, painted LM25 |
| SPXCDUSNTX4 cCSAus approved SP XCD-RTD 4~20mA Input Transmitter, 3 x 3/4'' NPT Entries, painted 316SS |
| With Modbus |
| SPXCDALMTX4M ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, painted LM25 |
| SPXCDASMTX4M ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, painted 316SS |
| SPXCDULNTX4M cCSAus approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted LM25 |
| SPXCDUSNTX4M cCSAus approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted 316SS |
| Note: Refer to "Sensepoint" pricelist for the new M25 for ATEX/IECEx and 3/4''NPT for cCSA threaded range of Sensepoint Toxic sensors that may be fitted directly to the 4-20mA input XCD-RTD transmitter. |
| Sensepoint XCD-RFD transmitter (use with Standard & Hi-Temp Sensepoint sensors) |
| Sensepoint XCD-RFD (Remote Flammable Detector) allows for remotely mounted flammable gas detectors such as Hi-Temperature version of Sensepint Flamable to be located in adverse applications and monitored from a convenient location. KIT includes Transmitter, Magnetic Wand and Allen Key |
| INSTRUMENT |
| Without Modbus |
| SPXCDALMRFD ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 2 x M20 Entries,1 x M25 Entry,painted LM25 |
| SPXCDASMRFD ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 2 x M20 Entries,1 x M25 Entry,painted 316SS |
| SPXCDULNRFD cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 3 x 3/4'' NPT Entries, painted LM25 |
| SPXCDUSNRFD cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 3 x 3/4'' NPT Entries, painted 316SS |
| With Modbus |
| SPXCDALMRFDM ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, paited LM25 |
| SPXCDASMRFDM ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, paited 316SS |
| SPXCDULNRFDM cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted LM25 |
| SPXCDUSNRFDM cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted 316SS |
| Remote Flammable Sensor (XCD Sensor Cartridge + Socket Housing) |
| SPXCDXSRFXSS Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing |
| SPXCDXSRRXSS Methane IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing |
| SPXCDXSRPXSS Propane IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing |
| SPXCDXSRB1SS Carbon Dioxide IR 0-2.00%VOL only with Socket Housing Sensor Cartridge with Socket Housing |
| SPXCDXSRB2SS Carbon Dioxide IR 0-5.00%VOL only with Socket Housing Sensor Cartridge with Socket Housing |
| 00780-A-0100 Term Hsg-Bartec DE1155 With Continuity Plate 1x25mm- 3x20mm Entries (ATEX certified) |
| Sensepoint XCD |
| ACCESSORIES, CONSUMABLES & SPARES |
| ACCESSORIES |
| S3KCAL Calibration cap |
| SPXCDCC Collecting cone for use with lighter than air gases |
| SPXCDDMK Duct mounting kit |
| SPXCDMTBR Mounting bracket (inc. bolts, nuts, brackets) |
| SPXCDSDP Sunshade / Deluge Protection |
| SPXCDFH Flow Housing for Sample Panel |
| Consumables |
| SPXCDXSFXSS Flammable CAT 0-100%LEL (20,0 to 100.0%LEL) |
| SPXCDXSRXSS CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL) |
| SPXCDXSPXSS C3H8 (Propane) IR 0-100%LEL (20,0 to 100.0%LEL) |
| SPXCDXSO1SS Oxygen 25.0%/Vol only |
| SPXCDXSHXSS Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm) |
| SPXCDXSCXSS Carbon Monoxide 0-300ppm (100 to 1000ppm) |
| SPXCDXSG1SS Hydrogen 0-1000ppm only |
| SPXCDXSNXSS Nitrogen Dioxide 10-50ppm (10.0 to 50.0ppm) |
| SPXCDXSB1SS Carbon Dioxide IR 0-2%VOL only |
| SPXCDXSB2SS Carbon Dioxide IR 0-5%VOL only |
| Spares (Miscellaneous) |
| SPXCDWP Sensepoint XCD Standard Weather Protection |
| SPXCDSRLS Sensor Retainer with locking screw |
| SPXCDAKS Allen key for stopper |
| SPXCDHWES Hex wrench for earth screw |
| SPXCDEBS Earth Bracket and Screws |
| SPXCDMAG Magnetic wand |
| SPXCDRSSH Sensor Socket Housing for XCD |
| SPXCDMBUS Replacement Modbus Module |
| SPXCDSERVK Service Kit, Including O-ring front cover (2 pieces), Terminal module screw (3 pieces), Earth screw and bracket (2 pieces), O-ring weather housing, O-ring cardridge retainer (2 pieces), O-ring on the cartridge (2 pieces), Locking screw for front cover and sensor retainer (2 pieces) |
| SPXCDTOOLK XCD Service Tool Kit, Including Magnet, Hex wrench for earth screw and Allen key for locking screws |
| SPXCDTMK XCD Terminals Kit, Including Terminal block for relays (green) and Terminal block power |
| SPXCDNPTP 3/4"NPT plug (Certified as part of Ex d enclosure) |
| SPXCDM20P M20 plug (Certified as part of Ex d enclosure) |
| Spares (Replacement Display Module) |
| Each replacement Display Module includes pre-configured PCB (for sensor and range), backlit LCD and plastic housing. The unit is a plug in replacement and simply requires confiiguration after fitting via the menu. |
| SPXCDDMT Replacement display module for O2 & Toxic |
| SPXCDDMF Replacement display module for FL & IR |
| SPXCDDM4 Replacement display module for RTD (4~20mA) |
| SPXCDDMR Replacement display module for RFD |
| SPXCDDMT12 Replacement O2 & Toxic display module Without Modbus for 12-32 Vdc |
| SPXCDDMF12 Replacement FL & IR display module Without Modbus for 12-32 Vdc |
| SPXCDDMTM12 Replacement O2 & Toxic display module with Modbus for 12-32 Vdc |
| SPXCDDMFM12 Replacement FL & IR display module with Modbus for 12-32 Vdc |
| SPXCDDMTM Replacement display module for O2 & Toxic with Modbus |
| SPXCDDMFM Replacement display module for FL & IR with Modbus |
| SPXCDDM4M Replacement display module for RTD with Modbus |
| SPXCDDMRM Replacement display module for RFD with Modbus |
| Spares (Replacement Terminal Module) |
| Each replacement terminal module includes pre-configured PCB (for sensor and range), terminals, screws, 'U' clamp, plastic cover and fixing screws. |
| SPXCDTMO Replacement terminal module for O2 |
| SPXCDTMT Replacement terminal module for Toxic |
| SPXCDTMF Replacement terminal module for FL & IR |
| SPXCDTMO12 Replacement O2 terminal module for 12-32 Vdc |
| SPXCDTMT12 Replacement Toxic terminal module for 12-32 Vdc |
| SPXCDTMF12 Replacement FL & IR terminal module for 12-32 Vdc |
| SPXCDTM4 Replacement terminal module for RTD (4~20mA) |
| SPXCDTMR Replacement terminal module for RFD |
| Spares (ATEX APPROVAL Replacement XCD STD version Transmitter only without MODBUS ) |
| SPXCDALMTXO ATEX/IECEX & AP approved SP XCD O2 Transmitter with LM25, M20 Entry |
| SPXCDALMTXT ATEX/IECEX & AP approved SP XCD Toxic Transmitter with LM25, M20 Entry |
| SPXCDALMTXF ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with LM25, M20 Entry |
| SPXCDASMTXO ATEX/IECEX & AP approved SP XCD O2 Transmitter with SS316, M20 Entry |
| SPXCDASMTXT ATEX/IECEX & AP approved SP XCD Toxic Transmitter with SS316, M20 Entry |
| SPXCDASMTXF ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with SS316, M20 Entry |
| Spares (ATEX APPROVAL Replacement XCD STD version Transmitter only with MODBUS ) |
| SPXCDALMTXOM ATEX/IECEX & AP approved SP XCD O2 Transmitter with LM25, M20 Entry |
| SPXCDALMTXTM ATEX/IECEX & AP approved SP XCD Toxic Transmitter with LM25, M20 Entry |
| SPXCDALMTXFM ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with LM25, M20 Entry |
| SPXCDASMTXOM ATEX/IECEX & AP approved SP XCD O2 Transmitter with SS316, M20 Entry |
| SPXCDASMTXTM ATEX/IECEX & AP approved SP XCD Toxic Transmitter with SS316, M20 Entry |
| SPXCDASMTXFM ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with SS316, M20 Entry |
| Spares (UL APPROVAL Replacement XCD STD version Transmitter only without MODBUS ) |
| SPXCDULNTXO UL approved SP XCD O2 Transmitter with LM25, 3/4"NPT Entry |
| SPXCDULNTXT UL approved SP XCD Toxic Transmitter with LM25, 3/4"NPT Entry |
| SPXCDULNTXF UL approved SP XCD FL/IR Transmitter with LM25, 3/4"NPT Entry |
| SPXCDUSNTXO UL approved SP XCD O2 Transmitter with SS316, 3/4"NPT Entry |
| SPXCDUSNTXT UL approved SP XCD Toxic Transmitter with SS316, 3/4"NPT Entry |
| SPXCDUSNTXF UL approved SP XCD FL/IR Transmitter with SS316, 3/4"NPT Entry |
| Spares (UL APPROVAL Replacement XCD STD version Transmitter only with MODBUS ) |
| SPXCDULNTXOM UL approved SP XCD O2 Transmitter with LM25, 3/4"NPT Entry |
| SPXCDULNTXTM UL approved SP XCD Toxic Transmitter with LM25, 3/4"NPT Entry |
| SPXCDULNTXFM UL approved SP XCD FL/IR Transmitter with LM25, 3/4"NPT Entry |
| SPXCDUSNTXOM UL approved SP XCD O2 Transmitter with SS316, 3/4"NPT Entry |
| SPXCDUSNTXTM UL approved SP XCD Toxic Transmitter with SS316, 3/4"NPT Entry |
| SPXCDUSNTXFM UL approved SP XCD FL/IR Transmitter with SS316, 3/4"NPT Entry |
| Special Flammable Gas Calibrations |
| SPXCDSFGC1 Special Flammable Gas Calibration, 0-100%LEL |
| SPXCDSFGC2 Special Flammable Gas Calibration, 0-100%LEL |
| SPXCDSFGC3 Special Flammable Gas Calibration, 0-100%LEL |
| SPXCDSFGC4 Special Flammable Gas Calibration, 0-100%LEL |
| SPXCDSFGC5 Special Flammable Gas Calibration, 0-100%LEL |
| SPXCDSFGC6-H Special Flammable Gas Calibration, 0-100%LEL,6* - Hydrogen |
| SPXCDSFGC7 Special Flammable Gas Calibration, 0-100%LEL |
| SPXCDSFGC8 Special Flammable Gas Calibration, 0-100%LEL |
------------------------------------------------------------------------------
| Any inquiry,Please feel free to contact: | ||
| Windy Wang | ||
| windy@hkxytech.com | ||
| HONGKONG XIEYUAN TECH CO., LIMITED | ||
| Add: 7-A16,Caishen Commercial Plaza,Hankou Railway Station,Wuhan,China | ||
| Tel: +86-27-8588 3233 | Fax:+86-27-8530 9780 | Mobile/Whatsapp :+86 15972199006 |
